采种大白菜地膜复盖的研究

为了提高大白菜(B. campestris ssp pekinensis.)种子的产量和质量,我们进行了两年地膜覆盖研究。结果表明:无论直播小株、育苗小株、老株那种采种方式,凡使用地膜覆盖的均比不覆盖的产量增加30％左右,质量也明显的提高;聚乙烯、聚氯乙烯都是良好的地而覆盖材料,在大白菜种子生产中可以取得相近似的效果。     

扁穗牛鞭草塑料袋青贮试验研究

对广益扁穗牛鞭草采用塑料袋进行青贮,通过使用不同厚度(0.6 mm、0.8 mm和1.0 mm)的聚乙烯薄膜和 不同的填装方法(压实和抽气),60 d后对青贮料进行品质鉴定,比较不同厚度薄膜和填装方法的优劣。结果表明,0.6 mm 规格不适于做青贮袋,0.8 mm、1.0 mm规格均适合;就抽气和压实而言,抽气由于工艺相对简单而效果较差,但压实过程 中由于力度难以掌握同样容易使塑料袋破损而导致青贮失败。     

膜下滴灌量对甜瓜产量和品质的影响

开展不同滴灌量对甜瓜品质影响的研究,对于新疆等西北干旱地区生产优质甜瓜、节约水资源具有重要意义。膜下不同滴灌处理对甜瓜品质的影响研究结果表明:在新疆的气候条件下,田间持水量70%-80%的处理,甜瓜品质表现较好,8601和新密19可溶性固形物含量达到13.69%和16.75%,维生素C含量分别达到8.05、12.55mg/kg,小区产量也分别高于其他处理。     

Response of labile organic C and N pools to plastic film removal from semiarid farmland soil

To examine the effects of plastic film removal on grain yield and soil organic matter (SOM), a spring maize (Zea may L.) field experiment was conducted for 5 yr at Changwu Agricultural and Ecological Experimental Station of Northwest China. Compared with traditional plastic film mulching during entire growing stages (FM), plastic film removal at the silking stage (RM) resulted in a 6.3% higher average maize yield. Under the RM treatment, soil organic carbon and total nitrogen significantly increased after the 5‐yr cultivation in the 0‐ to 20‐cm layer. Significant increases in extractable organic C (EOC), KMnO₄‐oxidizable C (KMnO₄‐C) and C management index (CMI) in the 0‐ to 20‐cm layer, and light fraction organic C and EOC in the 20‐ to 40‐cm layer were observed in response to plastic film removal after the 1‐yr treatment; the responses were more significant after 5 yr. Under the RM treatment, significant increases in microbial biomass C, light fraction organic N, extractable organic N, KMnO₄‐C and CMI were also observed after five years in the 20‐ to 40‐cm layer. Moreover, KMnO₄‐C and EOC were much more sensitive than other labile SOM fractions to the application of RM, even after only 1 yr of cultivation. Therefore, compared with mulching for the whole growing season, plastic film removal at the maize silking stage is an effective option for increasing yields and enhancing SOM concentration and soil sustainability in the regions with semiarid monsoon climates that have sufficient rainfall during maize reproductive stages.     

烟田苗期残膜回收机主要结构设计研究

根据烟田苗期的农艺要求和种植模式,在现有的烟田苗期残膜回收机的基础上,对其进行改进,设计出适合云南本地烟草种植模式的烟田苗期残膜回收机。介绍了残膜回收机的主体结构,并完成万向节传动机构的UG建模,对模型进行运动仿真得到速度传递的关系;设计能使机器在行走过程中实现仿形限深目的的机构以及在完成卷膜作业后能够方便卸膜的卸膜机构。     

循环流化床中塑料粉与稻壳共燃生成NO的研究

为研究塑料与稻壳共燃的氮氧化物生成规律，在自行设计的循环流化床装置上进行了二者的共燃实验。研究了温度、塑料粉和稻壳的混合比例及过量空气系数对NO生成量的影响。实验结果表明，随温度升高，NO生成量升高；随塑料粉与稻壳混合比例增加，NO生成量呈降低趋势，且NO的生成量低于二者单独焚烧时生成量的线性叠加；随着过量空气系数增加，NO生成量降低。为寻找二者共燃NO生成的一般性规律，采用径向基神经网络建立了NO生成的预测模型，预测结果显示该模型具有很高的精度。     

塑料微管配件研制与水力性能的测试研究

按水力学原理测得新研制的７种微管件的局部水头损失系数（Ｃ）值较同形状的大管件值大。将实测内任１～８ｍｍ微管资料计算的沿程阻力系数（λ）与雷诺数（Ｒｅ）．点在模迪（Ｌ·Ｆ·Ｍｏｏｄｙ）图中分析：平直铺放微管在Ｒｅ≤２３２０时，相关点拟合线在层流线以上；在２３２０＜Ｒｅ＜２５０００时，即过渡流可归并为光滑紊流计算［１］。绕曲微管水头损失虽然大于平直铺放微管，且可不分流态，进而给出可满足不同设计条件的经验公式。     

弧型齿残膜捡拾滚筒捡膜的机理

对弧型齿残膜清理滚筒捡膜齿的轴向排列、滚筒转速、捡膜齿运动轨迹和各相关参数进行分析研究,初步找出弧型捡膜齿满足要求的排列布置、滚筒转速和合理的入土深度,确定了残膜回收机具的运动参数λ范围,为残膜清理滚筒的设计提供了理论依据。试验表明,所设计的残膜回收机具运动参数是合理的,在保证膜土分离效果好和较高残膜捡拾率的前提下可显著提高工作效率。     

应用尼氏钝绥螨防治大棚草莓上硃砂叶螨的研究初报

尼氏钝绥螨(Amblyseius nicholsi Ehare＆Lee)能捕食硃砂叶螨(Tetranychuscinnabarinus Boisduval)各螨态,对卵的捕食量显著地高于其他螨态,其雌成螨对硃砂叶螨若螨的功能反应为HollingⅡ反应,在草莓大棚内释放尼氏钝绥螨能较好地防治硃砂螨叶     

Effects of plastic mulches on root zone temperature and on the manifestation of tomato spotted wilt symptoms and yield of tomato

Tomato spotted wilt (TSW) disease is a serious constraint to tomato production in various regions of the world. The effect of TSW on tomato yield is largely influenced by time of infection. Early infection usually results in severe stunting of the seedling and even death of the plant. Plastic film mulches affect both the incidence of TSW, and plant growth and yield of tomato. The objective of the present study was to determine the effect of root zone temperature (RZT) as affected by plastic film mulch on the manifestation of symptoms of TSW, and growth and yield of tomato plants either artificially inoculated with tomato spotted wilt virus (TSWV) or under natural TSW infection. In artificially inoculated plants as well as in plants under natural TSW infection, vegetative top fresh weight (FW) and fruit FW both increased with the length of time after transplanting that the plants remained free from TSW symptoms. The root zone temperature was highest under black mulch (seasonal mean = 27.5 °C), followed by gray (27.0 °C), silver (25.8 °C), and white (24.8 °C) mulches. The plants grown on black mulch showed the earliest appearance of TSW symptoms, and had significantly reduced vegetative growth and fruit yields compared to plants on the other mulches. In conclusion, utilization of plastic mulches that created conditions of high RZT stress resulted in reduced plant growth and yield and predisposed the plants to earlier expression of TSW symptoms compared to plants grown at RZTs more favorable to tomato plant growth (optimal RZT = 26.1 °C [Díaz-Pérez, J.C., Batal, K.D., Granberry, D., Bertrand, D., Giddings, D., Pappu, H., 2003. Vegetative top growth and yield of tomato grown on plastic film mulches as affected by the appearance of symptoms of Tomato spotted wilt virus. HortScience 38, 395–399]). Since these plant responses to TSW under heat stress occurred in artificially inoculated plants as well as in plants under natural TSW infection, high RZTs probably affected the plants directly, independently of any possible effects on the thrips vectors.